Preliminary Procedures

1. Remove the instrument panel accessory trim plate. Refer to Instrument Panel Accessory Trim Plate Replacement .
2. Remove the instrument panel center compartment. Refer to Instrument Panel Center Compartment Replacement
3. Remove the HVAC control assembly. Refer to Heater and Air Conditioning Control Replacement.

1

Radio Screw (Qty: 4)

Notice: Refer to Fastener Notice in the Preface section.

Tighten
2 N·m (18 lb in)

2

Radio Assembly

Procedure

1. Disconnect the electrical connector.
2. Disconnect the antenna cable.
3. Perform the radio set up procedure for new radios. Refer to Radio Setup.