GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2006 🢒 Matiz 🢒 Steering 🢒 Steering Wheel and Column 🢒 Steering Column Replacement

Removal Procedure

    Caution: Refer to Battery Disconnect Caution in the Preface section.

  1. Disable the SIR system. Refer to SIR Disabling and Enabling .
  2. Remove the steering wheel. Refer to Steering Wheel Replacement .
  3. Remove the turn signal switch and the wiper switch. Refer to Turn Signal Multifunction Switch Replacement .
  4. Remove the ignition lock cylinder. Refer to Ignition Lock Cylinder Replacement .
  5. Place match marks on the intermediate shaft and the steering column shaft.

    6. Object Number: 1631458 Size: SH
  6. Remove the intermediate shaft upper pinch bolt (1).

    7. Object Number: 1631465 Size: SH
  7. Remove the steering column lower nuts (1, 2).

    8. Object Number: 1631487 Size: SH
  8. Remove the steering column upper nuts (1) and washers.
  9. Remove the steering column.

Installation Procedure
  1. Position the steering column in the vehicle.

    2. Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 1631487 Size: SH

    Important: Align the match-mark on the intermediate shaft and the steering column shaft.

  2. Install the steering column upper nuts (1) and washers.

    3. Tighten
    Tighten the upper nuts to 17.5 N·m (12.91 lb ft).


    Object Number: 1631465 Size: SH
  3. Install the steering column lower nuts (1, 2).

    4. Tighten
    Tighten the lower nuts to 17.5 N·m (12.91 lb ft).


    Object Number: 1631494 Size: SH
  4. Install the intermediate shaft lower pinch bolt (1).

    5. Tighten
    Tighten the pinch bolt to 25 N·m (18 lb ft).

  5. Install the lock cylinder. Refer to Ignition Lock Cylinder Replacement .
  6. Install the turn signal switch and the wiper switch. Refer to Turn Signal Multifunction Switch Replacement .
  7. Install the steering wheel. Refer to Steering Wheel Replacement .
  8. Enable the SIR system, if equipped. Refer to SIR Disabling and Enabling .