GM Service Manual Online
For 1990-2009 cars only

    Object Number: 372976  Size: SH

    Important: Replace the bearing and housing assembly and the pivot pins if the bearing and housing assembly has been staked 3 times.

  1. Install the bearing and housing assembly.

  2. Object Number: 372978  Size: SH
  3. Lubricate the pivot pins with lithium grease.
  4. Install the 2 pivot pins.
  5. Stake the pivot pins in 3 locations.
  6. Install the lower shaft components. Refer to Steering Shaft, Lower Bearing, and Jacket - Assemble - Off Vehicle .
  7. Install the tilt spring only. Refer to Tilt Spring - Assemble - Off Vehicle .
  8. Install the Ignition switch assembly only. Refer to Ignition Switch Assembly - Assemble - Off Vehicle .
  9. Install the lock housing assembly. Refer to Lock Housing Assembly - Assemble - Off Vehicle .
  10. Install the windshield wiper and washer switch. Refer to Windshield Wiper and Washer Switch Replacement - On Vehicle .
  11. Install the multifunction switch. Refer to Multifunction, Turn Signal, and Hazard Switch Replacement - On Vehicle .
  12. Install the lock cylinder. Refer to Ignition Lock Cylinder Replacement - On Vehicle .
  13. Enable the inflatable restraint steering wheel module. Refer to Enabling the SIR System in SIR.