Removal Procedure
- Remove the HVAC module assembly. Refer to
HVAC Module Assembly Replacement .
- Remove the evaporator case assembly. Refer to
Air Conditioning (A/C) Evaporator Case Assembly Replacement .
- Remove the air inlet assembly. Refer to
Air Inlet Assembly Replacement .
- Remove the blower motor screws from the blower case assembly.
- Remove the blower motor from the blower case assembly.
- Remove the blower motor control module screws from the blower case assembly.
- Remove the blower motor control module from the blower case assembly.
- Remove the screws retaining the two halves of the blower case assembly.
- Separate the two halves of the blower case assembly.
- Remove the evaporator core from the blower case assembly.
Installation Procedure
- Install the evaporator core to the blower case assembly.
- Assemble the two halves of the blower case assembly.
Notice: Refer to Fastener Notice in the Preface section.
- Install the screws to retain the two halves of the blower case assembly.
Tighten
Tighten the screws to 1.5 N·m (13 lb in).
- Install the blower motor control module to the blower case assembly.
- Install the blower motor control module screws to the blower case assembly.
Tighten
Tighten the screws to 1.5 N·m (13 lb in).
- Install the blower motor to the blower case assembly.
- Install the blower motor screws to the blower case assembly.
Tighten
Tighten the screws to 1.5 N·m (13 lb in).
- Install the air inlet assembly. Refer to
Air Inlet Assembly Replacement .
- Install the evaporator case assembly. Refer to
Air Conditioning (A/C) Evaporator Case Assembly Replacement .
- Install the HVAC module. Refer to
HVAC Module Assembly Replacement .