GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2009 🢒 Vibe - FWD 🢒 Body Systems 🢒 Fixed and Moveable Windows 🢒 Front Side Door Window Regulator Replacement

Removal Procedure
  1. Remove the front door window. Refer to Front Side Door Window Replacement.

    2. Object Number: 2014678 Size: SH
  2. Remove the five bolts and the front door window regulator, if equipped without power windows.

    3. Object Number: 2014680 Size: SH
  3. Disconnect the electrical connector (2), if equipped with power windows.
  4. Loosen the temporary bolt (1).

    5. Note: Do not remove the temporary bolt. If the temporary bolt is removed, the front door window regulator may fall, causing damage.

  5. Remove the five bolts (3).
  6. Remove the front door power window regulator assembly.
  7. Remove the temporary bolt (1) from the power window regulator assembly.

    8. Object Number: 2015300 Size: SH
  8. Remove the three screws (1), (2), (3) and the front power window motor assembly from the power window regulator, if necessary.

Installation Procedure

    Caution: Refer to Fastener Caution in the Preface section.


    Object Number: 2015300 Size: SH
  1. Install the three screws (1), (2), (3) and the front power window motor assembly to the power window regulator, if removed. Tighten the power window motor screws to 5.4 N·m (48 lb in).

    2. Object Number: 2014680 Size: SH
  2. Install the temporary bolt (1) to the power window regulator assembly.
  3. Temporarily install the front door power window regulator assembly.
  4. Install the five bolts (3). Tighten the temporary bolt (1) and the five bolts to 8 N·m (71 lb in).
  5. Connect the electrical connector (2), if equipped with power windows.

    6. Object Number: 2014678 Size: SH
  6. Install the five bolts and the front door window regulator, if equipped without power windows. Tighten the five bolts to 8 N·m (71 lb in).
  7. Install the front door window. Refer to Front Side Door Window Replacement.