GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Saab 🢒 2009 🢒 9-7x 🢒 Body Repair 🢒 Bolted Exterior Body Panels and Closures 🢒 Hood Latch Support Replacement

Removal Procedure
  1. Loosen the hood close out filler panel. Refer to Front Bumper Upper Fascia Replacement.
  2. Remove the hood latch. Refer to Hood Primary and Secondary Latch Replacement.

    3. Object Number: 749967 Size: SH
  3. Remove the bolts that retain the hood latch support to the radiator support.
  4. Remove the hood latch support from the vehicle.

Installation Procedure

    Object Number: 749967 Size: SH
  1. Install the hood latch support to the vehicle.

    2. Caution: Refer to Fastener Caution in the Preface section.

  2. Install the bolts that retain the hood latch support to the radiator support and tighten bolts to 20 N·m (15 lb ft).
  3. Install the hood latch. Refer to Hood Primary and Secondary Latch Replacement.
  4. Install the hood close out filler panel. Refer to Front Bumper Upper Fascia Replacement.
  5. Inspect the hood for proper alignment.