Preliminary Procedures

1. Position window approximately half way down in the door.
2. Remove the interior trim panel. Refer to Rear Side Door Trim Panel Replacement .
3. Remove the water deflector. Refer to Rear Side Door Water Deflector Replacement .
4. Remove the window regulator. Refer to Rear Side Door Window Regulator Replacement .

1

Rear Door Window Regulator Motor Bolt (Qty: 3)

Notice: Refer to Fastener Notice in the Preface section.

Tip
Disconnect window regulator electrical connector.

Tighten
10 N·m (89 lb in)

2

Rear Door Window Regulator Motor