Preliminary Procedures

1. Position the rear side door window approximately half way down in the door.
2. Remove the rear door trim panel. Refer to Rear Side Door Trim Panel Replacement .
3. Remove the rear door water deflector. Refer to Rear Side Door Water Deflector Replacement .
4. Remove the rear side door inner belt sealing strip. Refer to Rear Side Door Window Inner Sealing Strip Replacement .
5. Remove the rear side door outer belt sealing strip. Refer to Rear Side Door Window Outer Sealing Strip Replacement .
6. Pull the window run channel from the applique and window frame.
7. Remove the front lower window channel. Refer to Rear Side Door Window Front Lower Channel Replacement .

1

Rear Door Window to Regulator Retainer

Tip

1. Access the retainer pin through the hole in the window regulator.
2. Use a suitable tool to drive the center pin out of the outer retainer.
3. Use a suitable tool to drive the pin out of the window.

2

Rear Door Window Regulator Sash

Tip
Raise the window up out of the sash.

3

Rear Door Window

Tip

1. Lower the window into the door until it is free from the front and rear run channel.
2. Rotate the rear door window as necessary to remove it from the door.