Preliminary Procedures

1. Position the rear door window approximately half way down in the door.
2. Remove the rear door trim panel. Refer to Rear Side Door Trim Panel Replacement .
3. Remove the rear door water deflector. Refer to Rear Side Door Water Deflector Replacement .
4. Remove the rear door window regulator. Refer to Rear Side Door Window Regulator Replacement .
5. Lower the window into the bottom of the door by hand to access the lower window channel.

1

Rear Side Door Window Front Lower Channel Bolt

Notice: Refer to Fastener Notice in the Preface section.

Tighten
10 N·m (89 lb in)

2

Rear Side Door Window Front Lower Channel

Tip

1. Lift up on the lower window channel to release the top clip from the door.
2. Release the wiring harness retainer from the lower window channel.