Preliminary Procedures

1. Remove the instrument panel assembly. Refer to Instrument Panel Assembly Replacement .
2. Remove the hood release handle. Refer to Hood Primary Latch Release Cable Handle Replacement .
3. Remove the steering column. Refer to Steering Column Replacement .
4. Remove the accelerator pedal assembly. Refer to Accelerator Pedal Bracket Replacement .
5. Remove the brake pedal assembly. Refer to Brake Pedal Assembly Replacement .
6. Remove the body control module bracket. Refer to Body Control Module Replacement .

1

Instrument Panel Reinforcement Assembly Bolt (Qty: 6)

Notice: Refer to Fastener Notice in the Preface section.

Tighten
25 N·m (18 lb ft)

2

Instrument Panel Lower Bracket Bolt (Qty: 4)

Tighten
9 N·m (80 lb in)

3

Instrument Panel Reinforcement Assembly

Procedure

1. Note location and routing of the instrument panel wiring harness prior to removal of the instrument panel reinforcement assembly to ensure proper reinstallation.
2. Disconnect the wiring harness from the instrument panel reinforcement assembly.
3. With the aid of an assistant, remove the instrument panel reinforcement assembly from the vehicle.
4. If replacing the instrument panel reinforcement assembly, transfer all necessary components.