Preliminary Procedures

1. Remove the interior trim panel. Refer to Rear Side Door Trim Panel Replacement.
2. Remove the water deflector. Refer to Rear Side Door Water Deflector Replacement.
3. Remove the rear door outside handle. Refer to Rear Side Door Outside Handle Replacement.

1

Rear Side Door Outside Handle Housing Screw

Caution: Refer to Fastener Caution in the Preface section.

Tighten
10 N·m (89 lb in)

2

Rear Side Door Lock Bolt (Qty: 3)

Tighten
10 N·m (89 lb in)

3

Rear Side Door Lock Assembly

Procedure

1. Release the inside handle cable retainers before removing the door lock.
2. Disconnect the door lock electrical connector.
3. Remove the door lock with the outside handle housing.
4. Transfer the handle and lock rods to the new door lock.