Preliminary Procedures

1. Position window approximately half way down in the door.
2. Remove the interior trim panel. Refer to Rear Side Door Trim Panel Replacement.
3. Remove the water deflector. Refer to Rear Side Door Water Deflector Replacement.
4. Remove the window regulator. Refer to Rear Side Door Window Regulator Replacement.

1

Rear Door Window Regulator Motor Bolt (Qty: 3)

Caution: Refer to Fastener Caution in the Preface section.

Tip
Disconnect window regulator electrical connector.

Tighten
10 N·m (89 lb in)

2

Rear Door Window Regulator Motor