Table 1: | Indicators |
Table 2: | Message Center |
Symbol | Description |
---|---|
| ABS: Refer to ABS Description and Operation in Antilock Brake System |
| Air Bag: Refer to SIR System Description and Operation in SIR |
(Export) BRAKE | BRAKE: Refer to Brake Warning System Description and Operation in Hydraulic Brakes |
| Charge: Refer to Charging System Description and Operation in Engine Electrical |
| Fasten Seat Belt: Refer to Seat Belt System Description and Operation in Seat Belts |
| High Beam: Refer to Exterior Lighting Systems Description and Operation in Lighting Systems |
| Low Oil Pressure: Refer to Indicator/Warning Message Description and Operation |
| MIL: Refer to Engine Control Module Description in Engine Controls |
| Security: Refer to Theft Systems Description and Operation in Theft Deterrent |
| Turn Signals: Refer to Exterior Lighting Systems Description and Operation in Lighting Systems |
| Upshift Indicator: Refer to Indicator/Warning Message Description and Operation |
Symbol | Description |
---|---|
CHG. OIL | Change Engine Oil: Refer to Indicator/Warning Message Description and Operation |
CHK GAGE | Check Gages: Refer to Indicator/Warning Message Description and Operation |
COOLANT | Coolant Level Low: : Refer to Cooling System Description and Operation in Engine Cooling |
CRUISE | Cruise: Refer to Cruise Control Description and Operation in Cruise Control |
ERROR | Error: Refer to Data Link Communications Description and Operation in Data Link Communications |
LOW FUEL | Low Fuel Level: Refer to Indicator/Warning Message Description and Operation |
LOW TRAC | Low Traction: Refer to ABS Description and Operation in Antilock Brake System |
OIL LIFE | Oil Life: Refer to Indicator/Warning Message Description and Operation |
PWR STR | Power Steering: Refer to Power Steering System Description and Operation in Power Steering System |
RESET | Reset: Refer to Indicator/Warning Message Description and Operation |
SERVICE VEHICLE | Service Vehicle: Refer to Indicator/Warning Message Description and Operation |
TRAC OFF | Traction Off: Refer to ABS Description and Operation in Antilock Brake System |
TRANS COLD | Transmission Cold: Refer to Transmission Indicators and Messages in Automatic Transmission |
TRANS HOT | Transmission Hot: Refer to Transmission Indicators and Messages in Automatic Transmission |
TRUNK | Trunk Ajar: Refer to Luggage Compartment Description and Operation in Body Rear End |
The IPC receives a class 2 message from the ECM indicating that the engine oil should be changed.
The IPC receives a class 2 message from the ECM indicating that the engine coolant temperature is over 123°C (253°F). This message is disabled when the engine coolant temperature is below 120°C (248°F).
The IPC receives a class 2 message from the ECM indicating the fuel level percent. The IPC displays the LOW FUEL message when the fuel level is at or below 10 percent. When the fuel level is above 25 percent, the LOW FUEL message is turned OFF.
The IPC illuminates the engine oil pressure indicator when the engine control module (ECM) detects low engine oil pressure, and the signal circuit is low. The IPC receives a class 2 message requesting illumination from the ECM.
The IPC displays the OIL LIFE message when the message center is in oil life monitor reset mode. When this message is displayed, the oil life monitor in the ECM can be reset by holding the trip reset button for a few seconds. The ECM receives a class 2 message from the IPC to reset the oil life monitor.
The IPC displays the RESET message after the ECM has received an oil life monitor reset request, via a class 2 message.
The IPC displays the SERVICE VEHICLE message when it receives a request from any module because of a detected problem.
The IPC illuminates the shift indicator when the ECM determines that the vehicle should be shifted to the next higher gear. The IPC receives a class 2 message from the ECM requesting illumination.