Notice: Refer to Fastener Notice in the Preface section.

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

Preliminary Procedure

Remove the rear compartment lid trim panel. Refer to Rear Compartment Trim Panel Replacement.

1

Rod, Lock Cylinder

Tip
Use a flat-bladed tool to release the lock rod.

2

Bolt, Rear Compartment Latch (Qty: 2)

Tip
Disconnect the electrical connector, if equipped.

Tighten
10 N·m (89 lb in)

3

Latch, Rear Compartment Lid

Tip
Remove the latch through the access hole.