GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Saturn 🢒 2002 🢒 L100/L200/LW200 🢒 Brakes 🢒 Park Brake 🢒 Parking Brake Shoe Replacement

Removal Procedure

    Caution: Refer to Vehicle Lifting Caution in the Preface section.

  1. Raise the vehicle on a hoist.
  2. Remove the rear wheel and the tire assembly.
  3. Remove the rear rotor. Refer to Rear Brake Rotor Replacement .
  4. Remove the upper and the lower return springs from the park brake shoes.

    5. Object Number: 891866 Size: SH
  5. Remove the park brake shoe hold down retainers.

    6. Object Number: 891901 Size: SH
  6. Remove the park brake shoes and the adjuster.

Installation Procedure

    Object Number: 891903 Size: SH
  1. Coat the adjuster with silicone grease at the locations in the diagram.

    2. Object Number: 891866 Size: SH
  2. Attach the park brake shoes to the back plate with the retainer springs.

    3. Object Number: 891901 Size: SH
  3. Slightly pull apart the shoes and install the adjuster.
  4. Check that the park brake shoes are properly engaged with the park brake lever.

    5. Object Number: 891917 Size: SH
  5. Install the upper and the lower return springs.
  6. Install the rear rotor. Refer to Rear Brake Rotor Replacement .
  7. Adjust the parking brake. Refer to Park Brake Adjustment .

    8. Notice: Refer to Wheel Installation Caution in the Preface section.

  8. Position the wheel and the tire assembly onto the hub.

    9. Notice: Refer to Fastener Notice in the Preface section.

  9. Install the wheel bolts and tighten in a crisscross pattern.
    10. 9.1. Hand tighten all 5 wheel bolts.
    9.2. Use a torque wrench to tighten the wheel bolts using a crisscross pattern.

    Tighten
    Tighten the wheel bolts (initial torque) to 63 N·m (46 lb ft).

    9.3. Use a torque wrench to final tighten the wheel bolts using a crisscross pattern.

    Tighten
    Tighten the wheel bolts (final torque) to 125 N·m (92 lb ft).

  10. Lower the vehicle from the hoist.