GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 897103  Size: SH
  1. Run the window in the 1/2 down position.
  2. Remove the door trim panel. Refer to Rear Side Door Trim Panel Replacement removal procedure .
  3. Remove the water deflector by carefully peeling off.

  4. Object Number: 897175  Size: SH
  5. Remove the inside weatherstrip around the rear of the window.

  6. Object Number: 896444  Size: SH
  7. Remove the window trim cover from the rear of the door.
  8. Remove the foam from the door structure, behind trim cover.

  9. Object Number: 893633  Size: SH
  10. Remove the rear door window rear run channel guide, and the weatherstrip.

  11. Object Number: 893622  Size: SH
  12. Remove the window glass by tilting the rear of the glass upward and sliding up and out.

Installation Procedure


    Object Number: 893622  Size: SH
  1. Install the window glass by tilting the rear of the glass upward and sliding down and in.
  2. Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 893633  Size: SH
  3. Install the rear door window run channel and the weatherstrip.
  4. Tighten
    Tighten the rear door window run channel bolts to 3 N·m (27 lb in).


    Object Number: 897175  Size: SH
  5. Install the inside weatherstrip around the window.

  6. Object Number: 896444  Size: SH
  7. Install the foam into the door structure, behind the trim cover.
  8. Install the window trim cover to the rear of the door.

  9. Object Number: 897103  Size: SH
  10. Install the water deflector.
  11. Install the trim panel. Refer to Rear Side Door Trim Panel Replacement installation procedure.
  12. Run the window to the up position and check operation. If binding exists, inspect all of the weatherstrip and adjust as necessary.