Removal Procedure
- Remove the rear door trim panel. Refer to
Rear Side Door Trim Panel Replacement
.
- Remove the rear door water deflector. Refer to
Rear Side Door Water Deflector Replacement
.
- Remove the wiring retainers from the door structure.
- Remove the 2 rubber grommets and pull the complete wiring harness
out of the door structure.
- Pull the complete harness out of the door structure routing harness between
the rear door and rocker panel.
- Remove the rubber grommet from the B-pillar and disconnect the electrical
connection.
Installation Procedure
- Connect the wiring harness to the electrical connector at the B-pillar.
- Route the harness under the rear door.
- Route the harness through the rear door connector opening and install
.
- Install the 2 rubber grommets.
- Connect the wiring retainers to the door structure.
- Connect the electrical connectors.
- Install the rear door water deflector. Refer to
Rear Side Door Water Deflector Replacement
- Install the rear door trim panel. Refer to
Rear Side Door Trim Panel Replacement
.