GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Saturn 🢒 2001 🢒 L300/LW300 🢒 Engine 🢒 Engine Mechanical - 3.0L (L81) 🢒 Drive Belt Replacement

Removal Procedure

    Object Number: 891739 Size: SH

    Important: The engine must be supported upon removal of the engine mount.

  1. Disconnect the negative battery cable.
  2. Remove the right front engine mount and engine mount bracket from the engine block. Refer to Engine Mount and Bracket Replacement - Right Side .

    3. Object Number: 894336 Size: SH
  3. Use a 15 mm wrench to rotate the tensioner pulley clockwise while sliding the drive belt off the tensioner or water pump pulley.
  4. Remove the drive belt.
  5. Clean and inspect the serpentine drive belt surfaces.

Installation Procedure

    Object Number: 894682 Size: SH
  1. Route the belt around all pulleys, except the tensioner or water pump.

    2. Important: Ensure that the drive belt is aligned into the proper grooves on the drive pulley.

  2. Use a 15 mm wrench to rotate the tensioner pulley clockwise.
  3. Slip the belt over the idler or water pump pulley.
  4. Install the right front engine mount. Refer to Engine Mount and Bracket Replacement - Right Side .
  5. Reconnect the negative battery cable.

    6. Tighten
    Tighten the battery terminal bolts to 17 N·m (13 lb ft).