Preliminary Procedure

1. Open both side doors in order to remove the rocker panel front molding assembly.
2. Remove the rocker panel rear molding. Refer to Rocker Panel Rear Molding Replacement .

1

Rocker Panel Finish Panel Screw (Qty: 3)

Notice: Refer to Fastener Notice in the Preface section.

Procedure

1. Remove the 3 front finish panel screws.
2. Release the 7 lower rocker molding retainers.
3. Release the 14 upper retainers.

Tighten
1.5 N·m (13 lb in)

2

Rocker Panel Rear Molding Assembly

Tighten
1.5 N·m (13 lb in)

3

Rocker Panel Front Molding Assembly

Procedure

1. Replace the retainer clips as needed.
2. Transfer the weatherstrip.