GM Service Manual Online
For 1990-2009 cars only

Object Number: 1847032  Size: SF

Callout

Component Name

Preliminary Procedure

Remove the air inlet grille panel. Refer to Air Inlet Grille Panel Replacement.

1

Windshield Wiper Transmission Bolt (Qty: 2)

Notice: Refer to Fastener Notice in the Preface section.

Tighten
22 N·m (16 lb ft)

2

Windshield Wiper Transmission Assembly

Procedure

  1. Raise the rearward edge of the transmission from the plenum.
  2. Disconnect the I/P harness electrical connector from the wiper motor.
  3. Remove the wiper motor. Refer to Windshield Wiper Motor Replacement.
  4. Upon installation of the wiper transmission, connect the electrical connector and rotate the transmission 180° into the plenum.