Callout
| Component Name
|
Preliminary Procedures
- Remove the tire and wheel. Refer to
Tire and Wheel Removal and Installation
.
- Without disconnecting the hydraulic brake hose from the caliper, remove and support the brake caliper with bracket as an assembly. Refer to
Front Brake Caliper Replacement
.
- Separate the lower control arm ball stud from the steering knuckle. Refer to
Steering Knuckle Replacement
.
|
1
| Lower Shock Absorber Mounting Bolts (Qty: 2)
|
2
| Lower Shock Absorber Retaining Nuts (Qty: 2)
Notice: Refer to Fastener Notice in the Preface section.
Tighten
28 N·m (21 lb ft) |
3
| Upper Shock Absorber Mounting Nuts (Qty: 2)
Tighten
47 N·m (35 lb ft) |
4
| Shock Module
Tip
| • | Raise the steering knuckle and upper control arm while removing the shock module toward the rear of the vehicle. |
|
