Removal Procedure
- Disconnect the antenna lead from the antenna base mating socket located by the
passenger's feet area.
- Use a wrench to loosen the antenna mast.
- Remove the antenna mast.
- Remove the right fender. Refer to
Front Fender Replacement
in Body Front End.
- Remove the fasteners from the antenna bracket assembly.
- Remove the antenna bracket assembly from the vehicle.
Installation Procedure
- Position the antenna bracket assembly to vehicle.
- Route the antenna connector through the spaceframe opening and install
the coax grommet to body opening.
- Route the antenna base/cable to the antenna lead and connect the antenna
lead to the antenna base mating socket.
Notice: Refer to Fastener Notice in the Preface section.
- Install the fasteners to secure the antenna bracket assembly to the vehicle.
Tighten
Tighten the antenna bracket-to-fender fasteners to 10 N·m (89 lb in).
- Install and tighten the antenna mast to the antenna base.
- Tighten the antenna mast down with a wrench.
Tighten
Tighten the antenna mast-to-antenna base to 10 N·m
(89 lb in).
- Install the right fender. Refer to
Front Fender Replacement
in Body Front End.