Removal Procedure
- Remove the outer panel. Refer to "Rear Door Outer Panel - Sedan/Wagon"
removal procedures in this manual.
- Remove the rear door trim panel. Refer to
Rear Side Door Trim Panel Replacement
.
- Disconnect the actuator from the lock rod.
- Disconnect the harness.
- Drive the center pin rearward enough to allow the head of the rivet to
be drilled.
- Drill out the rivets and remove the actuator.
- Cut the remaining portion of the rivets short and push through the hole
in the door assembly.
- Disconnect the inner trim panel and remove the rivets.
Installation Procedure
- Install the actuator with the rivets. Connect the harness and connect
the actuator to the lock rod.
- Install the rear door trim panel. Refer to
Rear Side Door Trim Panel Replacement
.
- Install the outer panel. Refer to "Rear Door Outer Panel - Sedan/Wagon"
installation procedures in this section.