For 1990-2009 cars only
Removal Procedure
- Remove the rear door trim panel. Refer to Rear Side Door Trim Panel Replacement .
- Remove the water deflector. Refer to Rear Side Door Water Deflector Replacement .
- Remove the inner belt sealing strip. Refer to Rear Door Window Belt Inner Sealing Strip Replacement .
- Remove the outer belt sealing strip. Refer to Rear Door Window Belt Outer Sealing Strip Replacement .
- Remove the window to window regulator bolts (1,2).
- Remove the rear door window.
Installation Procedure
- Install the rear door window.
- Install the rear door window to the rear door window regulator bolts (1,2).
- Install the window inner belt sealing strip. Refer to Rear Door Window Belt Inner Sealing Strip Replacement .
- Install the outer belt sealing strip. Refer to Rear Door Window Belt Outer Sealing Strip Replacement .
- Install the water deflector. Refer to Rear Side Door Water Deflector Replacement .
- Install the door trim panel. Refer to Rear Side Door Trim Panel Replacement .
| 1.1. | Position the window to the door between the inner and the outer panels. |
| 1.2. | Point the lower front corner of the window down and pass the window through the belt opening. |
| 1.3. | Align the edges of the door window with the door window weatherstrip. |
| 1.4. | Turn the rear door window to a horizontal position and align the holes in the window with the holes in the regulator. |
Ensure that the window clips are seated on the regulator carrier plate.
Important: Install the forward bolt first bolt.
Tighten
Tighten the window to regulator bolts to 10 N·m (89 lb in).
Important: Ensure that both sealing lips on the outer belt sealing strip are not rolled over and pointing downwards. If this condition is present the rear door window will not raise properly.
