Step
| Action
| Value(s)
| Yes
| No
|
1
| Was the power door locks system
check performed?
| --
| Go to
Step 2
| Go to
Power Windows System Check
|
2
| Does the right front window operate from the left front power window
switch?
| --
| Go to
Step 18
| Go to
Step 3
|
3
|
- Turn the ignition to the ON position.
- Connect a test lamp.
- Backprobe the LF power window switch between terminal F of connector
C1 (Sedan) and ground.
- Press the RF switch in the LF power window switch to the UP position.
Does the test lamp light?
| --
| Go to
Step 4
| Go to
Step 6
|
4
|
- Connect a test lamp.
- Backprobe the LF power window switch between terminal C, of connector
C1 (Sedan) and positive battery voltage.
- Press the RF switch in the LF power window switch to the DOWN
position.
Does the test lamp light?
| --
| Go to
Step 5
| Go to
Step 6
|
5
|
- Connect a test lamp.
- Backprobe the RF power window switch between terminal A and ground.
- Press the RF switch in the LF power window switch to the UP position.
Does the test lamp light?
| --
| Go to
Step 7
| Go to
Step 8
|
6
| Replace the LF power window switch. Refer to
Rear Side Door Window Switch Replacement
.
Is the repair complete?
| --
| Go to
Power Windows System Check
| --
|
7
|
- Connect a test lamp.
- Backprobe the RF power window switch between terminal E and ground.
- Press the RF switch in the LF power window switch to the DOWN
position.
Does the test lamp light?
| --
| Go to
Step 9
| Go to
Step 10
|
8
| Repair the open in CKT 166 between the LF power window switch
and the RF power window switch. Refer to
Wiring Repairs
in Wiring Systems.
Is the repair complete?
| --
| Go to
Power Door Locks System Check
| --
|
9
|
- Connect a test lamp.
- Backprobe the RF power window switch between terminal D and ground.
- Press the RF switch in the LF power window switch to the UP position.
Does the test lamp light?
| --
| Go to
Step 11
| Go to
Step 13
|
10
| Repair the open in CKT 167 between the LF power window switch
and the RF power window switch. Refer to
Wiring Repairs
in Wiring Systems.
Is the repair complete?
| --
| Go to
Power Door Locks System Check
| --
|
11
|
- Connect a test lamp.
- Backprobe the RF power window switch between terminal H and ground.
- Press the RF switch in the LF power window switch to the DOWN
position.
Does the test lamp light?
| --
| Go to
Step 12
| Go to
Step 13
|
12
|
- Disconnect the RF power window motor.
- Connect a test lamp between terminal A of the RF power window
motor connector and ground.
- Press the RR switch in the in the LF power window switch to the
UP position.
Does the test lamp light?
| --
| Go to
Step 14
| Go to
Step 15
|
13
| Replace the RF power window switch. Refer to
Rear Side Door Window Switch Replacement
.
Is the repair complete?
| --
| Go to
Power Windows System Check
| --
|
14
|
- Connect a test lamp between terminal B of the RF power window
motor connector and ground.
- Press the RF switch in the LF power window switch to the DOWN
position.
Does the test lamp light?
| --
| Go to
Step 16
| Go to
Step 17
|
15
| Repair the open in CKT 666 between the RF power window motor.
Refer to
Wiring Repairs
in
Wiring Systems.
Is the repair complete?
| --
| Go to
Power Windows System Check
| --
|
16
| Replace the RF power window motor.
Is the repair complete?
| --
| Go to
Power Windows System Check
| --
|
17
| Repair the open in CKT 667 between the RF power window motor
and the RF power window switch. Refer to
Wiring Repairs
in Wiring Systems.
Is the repair complete?
| --
| Go to
Power Windows System Check
| --
|
18
|
- Connect a test lamp.
- Backprobe the LF power window switch between terminal A and ground
(Sedan).
- Backprobe the RH wiring harness junction block between connector
C3 terminal B8 and ground (Coupe).
Does the test lamp light?
| --
| Go to
Step 19
| Go to
Step 21
|
19
|
- Connect a test lamp.
- Backprobe the RF power window switch between terminal B and ground.
Does the test lamp light?
| --
| Go to
Step 20
| Go to
Step 22
|
20
| Replace the RF power window switch.
Is the repair complete?
| --
| Go to
Power Windows System Check
| --
|
21
|
- Replace the LF power window switch (Sedan).
- Ensure the power window circuit breaker is functioning. If OK,
replace the RH wiring harness junction block.
Is the repair complete?
| --
| Go to
Power Windows System Check
| --
|
22
|
- Repair the open in CKT 1307 (Sedan).
- Repair the open in CKT 141 (Coupe).
Is the repair complete?
| --
| Go to
Power Windows System Check
| --
|
