- Remove the ignition and key alarm switch assembly. Refer to
Ignition and Key Alarm Switch Assembly - Disassemble - Off Vehicle
.
- Remove the steering column tilt head components. Refer to
Steering Column Tilt Head Housing - Disassemble - Off Vehicle
.
- Remove the park lock cable assembly (1)
from the electronic lock module assembly in the following way:
3.1. | Place the steering column lock cylinder set into the OFF position. |
3.2. | Place the shift lever clevis into the PARK position. |
3.3. | Use a small blade to push against the locking tab on the end of
the park lock cable assembly (1). |
3.4. | Disconnect the park lock cable assembly (1) from the electronic
lock module assembly. |
- Remove the 3 TORX® screws (2)
from the electronic lock module assembly (1).
- Remove the electronic lock module assembly (2) from the
steering column tilt head assembly.