GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Buick 🢒 2003 🢒 Rendezvous - AWD 🢒 Body and Accessories 🢒 Doors 🢒 Rear Side Door Window Weatherstrip Replacement

Removal Procedure

    Object Number: 624483 Size: SH
  1. Place the rear window in the full down position.
  2. Remove the trim panel. Refer to Rear Side Door Trim Panel Replacement .
  3. Remove the water deflector. Refer to Rear Side Door Water Deflector Replacement .
  4. Remove the outer belt sealing strip. Refer to Rear Door Window Belt Outer Sealing Strip Replacement .
  5. Remove the screw from the rear window channel.
  6. Remove the channel from the rear door.

Installation Procedure

    Object Number: 624483 Size: SH
  1. Position the channel to the rear door starting in the corner.

    2. Work outward in both directions.

  2. Firmly seat the channel to the rear door.

    3. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  3. Install the screw to the rear window channel.

    4. Tighten
    Tighten the screw to 10 N·m (89 lb in).

  4. Inspect the rear door window for proper operation.
  5. Install the outer belt sealing strip. Refer to Rear Door Window Belt Outer Sealing Strip Replacement .
  6. Install the water deflector. Refer to Rear Side Door Water Deflector Replacement .
  7. Install the trim panel. Refer to Rear Side Door Trim Panel Replacement .