- Disable the inflatable restraint steering wheel module coil. Refer to Disabling the SIR System in SIR.
- Remove the steering wheel from the column. Refer to Steering Wheel Replacement .
- Remove the steering column from the vehicle. Refer to Steering Column Replacement .
- Inspect the steering column for accident damage. Refer to Steering Column Accident Damage Inspection - Off Vehicle .
- Remove the upper and lower trim cover. Refer to Steering Column Trim Covers - Disassemble - Off Vehicle .
- Disconnect the 3 connectors from the turn signal and multifunction switch assembly (3).
- Remove the 2 pan head tapping screws (1) and (2) from the turn signal and multifunction switch assembly (3).
- Remove the turn signal and multifunction switch assembly (3) from the steering column.
Caution: This vehicle is equipped with a Supplemental Inflatable Restraint (SIR) System. Failure to follow the correct procedure could cause the following conditions:
• Air bag deployment • Personal injury • Unnecessary SIR system repairs • Refer to SIR Component Views in order to determine if you are performing service on or near the SIR components or the SIR wiring. • If you are performing service on or near the SIR components or the SIR wiring, disable the SIR system. Refer to Disabling the SIR System.
Important: When removing the upper and lower trim cover, you do not have to remove the wire harness straps for the turn signal and multifunction switch assembly procedure.
