GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 1998 🢒 Seville 🢒 Body and Accessories 🢒 Instrument Panel, Gauges, and Console 🢒 Instrument Panel Retainer Replacement

Removal Procedure
  1. Disable SIR. Refer to Disabling the SIR System in SIR.

    2. Object Number: 105564 Size: MH
  2. Remove the console (3). Refer to Console Replacement .
  3. Remove right insulator panel. Refer to Instrument Panel Insulator Panel Replacement .
  4. Remove the IP endcaps. Refer to Instrument Panel Outer Trim Cover Replacement .
  5. Remove the side window air outlets. Refer to Side Window Air Outlet Replacement .

    6. Object Number: 105552 Size: SH
  6. Remove the IP upper trim pad (1). Refer to Instrument Panel Upper Trim Pad Replacement .
  7. Remove the passenger side SIR inflator module. Refer to Inflatable Restraint Instrument Panel Module Replacement in SIR.
  8. Remove the right IP accessory trim plate. Refer to Instrument Panel Accessory Trim Plate Replacement .
  9. Remove the IP cluster. Refer to Instrument Cluster Replacement .
  10. Remove the IP center trim plate. Refer to Instrument Panel Center Trim Panel Replacement .

    11. Object Number: 287815 Size: SH
  11. Remove the radio. Refer to Radio Replacement in Entertainment.
  12. Remove the lap cooler duct. Refer to Lap Cooler Duct Replacement .
  13. Remove the knee bolster. Refer to Knee Bolster Replacement .
  14. Remove the steering column. Refer to Steering Column Replacement in Steering Wheel and Column-Tilt.
  15. Remove headlamp switch. Refer to Headlamp Switch Replacement In Lighting Systems.

    16. Object Number: 105539 Size: SH
  16. Remove fuel door/rear compartment release switch (2) from the IP. Refer to Fuel/Rear Compartment Release Switch Replacement .
  17. Remove the IP storage compartment. Refer to Instrument Panel Compartment Replacement .
  18. Remove fasteners (10 total) from IP retainer to IP carrier. One fastener is located in the opening for the fuel/rear compartment release switch.
  19. Remove IP retainer from the carrier, feed wiring through openings as necessary.
  20. Disconnect the inside air temperature sensor electrical connector.

    21. Complete removal.

  21. Transfer all necessary components.

Installation Procedure
  1. Partially install the IP retainer.

    2. Connect the inside air temperature sensor electrical connector.

  2. Install IP retainer to the carrier, feed wiring through openings as removed.
  3. Install fasteners from IP retainer to IP carrier.
  4. Install the IP storage compartment. Refer to Instrument Panel Compartment Replacement .

    5. Object Number: 105539 Size: SH
  5. Install the fuel/rear compartment release switch (2). Refer to Fuel/Rear Compartment Release Switch Replacement .
  6. Install headlamp switch. Refer to Headlamp Switch Replacement in Lighting Systems.
  7. Install the steering column. Refer to Steering Column Replacement in Steering Wheel and Column-Tilt.
  8. Install the knee bolster. Refer to Knee Bolster Replacement .
  9. Install the lap cooler duct. Refer to Lap Cooler Duct Replacement .
  10. Install the radio. Refer to Radio Replacement in Entertainment.
  11. Install the IP center trim plate. Refer to Instrument Panel Center Trim Panel Replacement .

    12. Object Number: 105547 Size: SH
  12. Install the IP cluster (2). Refer to Instrument Cluster Replacement .
  13. Install the right IP accessory trim plate. Refer to Instrument Panel Accessory Trim Plate Replacement .
  14. Install the passenger side SIR inflator module. Refer to Inflatable Restraint Instrument Panel Module Replacement in SIR.

    15. Object Number: 105552 Size: SH
  15. Install the IP upper trim pad (2). Refer to Instrument Panel Upper Trim Pad Replacement .

    16. Object Number: 105522 Size: SH
  16. Install the side window air outlets (2). Refer to Side Window Air Outlet Replacement .
  17. Install the IP endcaps. Refer to Instrument Panel Outer Trim Cover Replacement .
  18. Install right insulator panel. Refer to Instrument Panel Insulator Panel Replacement .
  19. Install the console. Refer to Console Replacement .
  20. Enable SIR. Refer to Enabling the SIR System in SIR.