Auxiliary RCA Video Jacks - Audio Inoperative or Degraded Quality 98
Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Was the entire Navigation System Check performed? | -- | Go to Navigation System Check | |
2 | Verify that the video component connected to the vehicle is operating properly. Is the video component operating properly? | -- | System OK | |
3 |
Is the voltage measured within the specified range? | 0 V | ||
4 |
Is the resistance measured within the specified range? | 0-2 ohms | ||
5 | Repair the short to B+ in the drain circuit between cavity F of the Aux RCA Video Jacks connector and cavity 17 of the Navigation Display Module connector C3. Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | -- | Go to Navigation System Check | -- |
6 | Measure the resistance between pin F of the Aux RCA Video Jacks pigtail connector and the male portion of the RED Aux RCA Video Jack with a DMM. Is the resistance measured within the specified range? | 0-2 ohms | ||
7 | Repair the open in the drain circuit between cavity F of the Aux RCA Video Jacks connector and cavity 17 of the Navigation Display Module connector C3. Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | -- | Go to Navigation System Check | -- |
8 | Measure the resistance between pin F of the Aux RCA Video Jacks pigtail connector and the male portion of the WHITE Aux RCA Video Jack with a DMM. Is the resistance measured within the specified range? | 0-2 ohms | ||
9 | Replace the Navigation Display Module. Refer to Navigation Display Module Replacement in Instrument Panel, Gauges and Console. Is the replacement complete? | -- | Go to Navigation System Check | -- |
10 | Replace the Aux RCA Video Jacks. Refer to Auxiliary Audio/Video Input Control Replacement in Instrument Panel, Gauges and Console. Is the replacement complete? | -- | Go to Navigation System Check | -- |
