Body Control Module Replacement Dash Integration Module

Before replacement of the dash integration module record the personalization settings (if equipped). Program the new module with the personalization settings after replacement.

1. Remove the passenger side sound insulator. Refer to Instrument Panel Insulator Panel Replacement - Right Side or Instrument Panel Insulator Panel Replacement - Left Side in Instrument Panel, Gauges and Console.
2. Disconnect the courtesy lamp electrical connector.
3. Remove the IP storage compartment. Refer to Instrument Panel Compartment Replacement in Instrument Panel, Gauges and Console.



4. Disconnect the dash integration module electrical connectors.
5. Remove the dash integration module from the bracket.

1. Install the dash integration module to the bracket.



2. Connect the dash integration module electrical connectors.
3. Install the IP storage compartment. Refer to Instrument Panel Compartment Replacement in Instrument Panel, Gauges and Console.
4. Connect the courtesy lamp electrical connector
5. Install the passenger side sound insulator. Refer to Instrument Panel Insulator Panel Replacement - Right Side or Instrument Panel Insulator Panel Replacement - Left Side in Instrument Panel, Gauges and Console.
6. Reprogram the dash integration module. Refer to Body Control Module (BCM) Programming/RPO Configuration .

Body Control Module Replacement Rear Integration Module

Before replacement of the rear integration module record the personalization settings (if equipped). Program the new module with the personalization settings after replacement.

1. Remove the rear seat cushion. Refer to Rear Seat Cushion Replacement in Seats.
2. Remove the rear seat back. Refer to Rear Seat Back Replacement in Seats.
3. Move the rear seat back insulator aside.



4. Disconnect the rear integration module electrical connectors (3).
5. Remove the rear integration module.

1. Install the rear integration module .



2. Connect the electrical connectors (3).
3. Reposition the rear seat back insulator.
4. Install the rear seat back. Refer to Rear Seat Back Replacement in Seats.
5. Install the rear seat cushion. Refer to Rear Seat Cushion Replacement in Seats.
6. Perform the vehicle personalization to reset the owner's desired personalization settings. Refer to Body Control Module (BCM) Programming/RPO Configuration .

Body Control Module Replacement Instrument Panel Module

After replacement of the Instrument Panel Module, Recalibration is necessary. Refer to Body Control Module (BCM) Programming/RPO Configuration .

The instrument panel module (IPM) is a integral part of the HVAC control assembly and is located in the climate control head. Refer to one of the following procedures: Control Assembly Replacement in HVAC System-Automatic.