Front Fog Lamp Replacement for Cadillac XLR 2005

1. Remove the front fascia lower close out panel. Refer to Front Bumper Fascia Lower Close Out Panel Replacement .



2. Disconnect the electrical connector from the bulb/socket (2).
3. Remove the nuts (3) attaching front fog lamp (1) to the front fascia.
4. Remove the fog lamp (1) from the fascia.
5. Remove the bulb/socket from fog lamp. Refer to Front Fog Lamp Bulb Replacement .

1. Install the bulb/socket to fog lamp. Refer to Front Fog Lamp Bulb Replacement .



2. Install the fog lamp (1) to the fascia.

Notice: Refer to Fastener Notice in the Preface section.

3. Install fog lamp nuts (3).

Tighten
Tighten the nuts to 6 N·m (53 lb in).

4. Connect the fog lamp electrical connector to the bulb/socket (2).
5. Inspect the fog lamp for proper operation.
6. Install the front fascia lower close out panel. Refer to Front Bumper Fascia Lower Close Out Panel Replacement .
7. Aim the fog lamp. Refer to Fog Lamp Aiming .