Read this manual thoroughly to become familiar with how the navigation system operates.

The navigation system includes navigation and audio functions.

While entering the vehicle or when turning the vehicle off, some DVD Map Disc noise is normal.

Keeping your eyes on the road and your mind on the drive is important for safe driving. The navigation system has built-in features intended to help keep your eyes on the road and mind on the drive. Some features may be disabled while driving. Note that these functions will be grayed-out. A grayed-out function indicates it is not available when the vehicle is moving.

All functions are available when the vehicle is parked. Do the following before driving:

Caution: Taking your eyes off the road too long or too often while using the navigation system could cause a crash resulting in injury or death to you or others. Focus your attention on driving.

Caution: Avoid looking too long or too often at the moving map on the navigation screen. This could cause a crash and you or others can be injured or killed. Use the turn-by-turn voice guidance directions whenever possible.

Use the navigation system to:

You should always be alert and obey traffic and roadway laws and instructions, regardless of the guidance from the navigation system. Because the navigation system uses street map information that does not include all traffic restrictions or the latest road changes, it may suggest using a road that is now closed for construction or a turn that is prohibited by signs at the intersection. Because the system uses limited information, you must always evaluate whether following the system's directions is safe and legal for the current conditions.

When the navigation system is turned on, a screen may appear with the information below, and you must read and acknowledge the information it contains.

Caution: Taking your eyes off the road for extended periods could cause a crash resulting in injury or death to you or others.

To help avoid a crash in which you or others could be killed:

After you acknowledge the start up information you will be able to access the NAV (navigation) and DEST (destination) functions. Once accessed, you can enter or delete information in the navigation system or access other functions. See instructions later in this section.

Every fifty times the vehicle is started and the navigation system is turned on, the Caution screen appears. After reading the caution, select OK to load the map DVD information. If OK is not selected, all hard keys except for NAV (Navigation) and DEST (Destination) can be accessed. You can also press the NAV hard key to have this Caution screen appear.

When getting started, set the navigation system to your preference or delete information you may have entered using various options.

To change the language of the prompts that appear on the navigation screens, see "DIC Operation and Displays" in the Index of the vehicle's owner manual.

This navigation system can record and store destinations. You may want to delete stored destinations when the vehicle is sold or the lease has expired. Refer to the following sections to delete the destination information that has been stored.

See "Memory Points", "Home", "Previous Destination" and "Preset Destinations", under Stored Locations for deleting stored destinations.

To set preset radio stations:

1. Press the power/volume knob to turn the system on.
2. Press the SRCE hard key and select the desired band (AM, FM1, FM2, XM1, or XM2 (if equipped)).
3. Use the TUNE/SEEK arrows to tune to the desired station.
4. Press and hold one of the six preset screen buttons, at the bottom of the screen, until a beep is heard or the station is displayed on the selected preset button.
5. Repeat the steps for each preset.

See "Preset Station Menu" under Navigation Audio System for more information.

To set the time:

1. Press the power/volume knob to turn the system on.
2. Press and hold the time display in the upper right corner of any screen.
3. Select the 12H or 24H screen button to display the time in standard or military time.
4. Press and hold the Hour and Min. (minute) arrow buttons to increase or to decrease the time.
5. Select the correct time zone screen button.
6. Select the Daylight Saving Time screen button, if necessary.

The radio uses the GPS satellite to set the time. The vehicle needs to be in an open area to receive the signal. See "Clock" under Navigation Audio System for more information.

Before entering an Address, Point of Interest, Home, or Preset Destination, select the correct region that contains the final destination. The vehicle must be stopped to do this operation.

Setting the Region

To set the region:

1. If the radio is already on with a map disc inserted, skip to Step 5.
2. Press the power/volume knob to turn the system on.
3. Insert the DVD map disc. See "Installing the Map DVD" under Maps for more information.
4. A notice may appear. Touch the Agree screen button to proceed.
5. Press the NAV hard key.
6. Press the MENU screen button.
7. Press the Enter Destination screen button.
8. Press the Region screen button.
9. Select the correct numbered region screen button that contains your final destination.

The system returns to the Enter Destination menu. See Enter Destination for more information.

Entering an Address

To set a destination by entering a street address:

1. If the radio is already on with a map disc inserted, skip to Step 5.
2. Press the power/volume knob to turn the system on.
3. Insert the DVD map disc. See "Installing the Map DVD" under Maps for more information.
4. A notice may appear. Touch the Agree screen button to proceed.
5. Press the NAV hard key.
6. Press the MENU screen button.
7. Press the Enter Destination screen button. Verify that the selected Region is correct.
8. Press the Address screen button.
9. Enter the street name using the alpha keypad on the screen.

Do not enter street direction (ie N, S.E., or W) information or type of street (ie road, lane, or court) to the address. Use the space symbol screen button () between street or city names. For example, the street name N. Royal Oak Rd. should be entered as royaloak. Use the backspace () screen button if an incorrect character has been entered.

10. Select the type of street (Dr., Ln., St., etc.) if it applies, from the list.
11. If there is more than one city, the system displays the list of cities that have a street with that name. Select a city from the list or select the Input Name screen button to enter the city name.
12. Enter the house number using the numeric keypad on the screen and touch the OK screen button.

A map screen appears with the destination marked.

13. Select the (destination) symbol screen button.
14. Select the Guide screen button.
15. Once driving begins, an audio prompt "Proceed to the highlighted route" is heard. The vehicle is now in route guidance mode.

See "Address" under Enter Destination for more information.

Entering a Point of Interest (POI)

To set a destination by entering a Point of Interest (POI):

1. If the radio is already on with a map disc inserted, skip to Step 5.
2. Press the power/volume knob to turn the system on.
3. Insert the DVD map disc. See "Installing the Map DVD" under Maps for more information.
4. A notice may appear. Touch the Agree screen button to proceed.
5. Press the NAV hard key.
6. Press the MENU screen button.
7. Press the Enter Destination screen button. Verify that the selected Region is correct.
8. Press the Point of Interest screen button.
9. Enter the specific title of the POI in the Name space (i.e. Washington Monument) using the alpha keypad on the screen.
10. Select the POI from the list.
11. If there is more than one city, the system displays the list of cities that have a street with that name. Select a city from the list or select the Input Name screen button to input the city name.

A map screen appears with the destination marked.

12. Select the (destination) symbol screen button.
13. Select the Guide screen button.
14. Once driving begins an audio prompt "Proceed to the highlighted route" is heard. The vehicle is now in route guidance mode.

Using the Category or City selections to help find the POI by limiting the search options. See "Point of Interest (POI)" under Enter Destination for more information.

Storing a Home Destination

1. If the radio is already on with a map disc inserted, skip to Step 5.
2. Press the power/volume knob to turn the system on.
3. Insert the DVD map disc. See "Installing the Map DVD" under Maps for more information.
4. A notice may appear. Touch the Agree screen button to proceed.
5. Press the NAV hard key.
6. Press the MENU screen button.
7. Press the Stored Locations screen button.
8. Press the Home screen button.
9. Press the Add screen button.
10. Press the Address screen button and enter all address information.
11. Press the OK screen button.

A map screen appears with the destination marked.

12. Press the OK screen button.
13. Press the back arrow screen button.

The Home icon is highlighted on the Enter Destination screen. See "Using Your Home or Preset Destinations" later in this section for more information.

Storing a Preset Destination

1. If the radio is already on with a map disc inserted, skip to Step 5.
2. Press the power/volume knob to turn the system on.
3. Insert the DVD map disc. See "Installing the Map DVD" under Maps for more information.
4. A notice may appear. Touch the Agree screen button to proceed.
5. Press the NAV hard key.
6. Press the MENU screen button.
7. Press the Stored Locations screen button.
8. Press the Previous Dest. screen button.
9. Press the Add screen button, then select the numbered preset button for the destination to appear as.
10. Press the Address screen button and enter all address information.
11. Press the OK screen button.

A map screen appears with the destination marked.

12. Press the OK screen button.
13. Press the back arrow screen button.

The numbered preset destination is highlighted on the Enter Destination screen. See "Using Your Home or Preset Destinations" next in this section for more information.

These destinations are available for selection while driving.

1. If the radio is already on with a map disc inserted, skip to Step 5.
2. Press the power/volume knob to turn the system on.
3. Insert the DVD map disc. See "Installing the Map DVD" under Maps for more information.
4. A notice may appear. Touch the Agree screen button to proceed.
5. Press the NAV hard key.
6. Press the MENU screen button.
7. Press the Enter Destination screen button.
8. Select the (Home symbol) or one of the available preset destination symbols. A map screen appears with the destination marked.
9. Select the (destination) symbol screen button.
10. Select the Guide screen button.
11. Once driving begins an audio prompt "Proceed to the highlighted route" is heard. The vehicle is now in route guidance mode.

Guidance is canceled once you arrive at the final destination. To cancel guidance prior to arrival at the final destination:

1. Press the NAV hard key to access the map screen.
2. Press the MENU screen button on the map screen.
3. Press the Route Options screen button.
4. Press the Cancel Guidance screen button.
5. Press the Yes screen button to confirm cancellation.

Once a destination has been stored, the address information can then be edited and deleted. See Stored Locations for more information on other features that can be stored, edited, and deleted.

To delete the stored home destination:

1. Press the power/volume knob to turn the system on.
2. Insert the DVD map disc. See "Installing the Map DVD" under Maps for more information.
3. A notice may appear. Touch the Agree screen button to proceed.

If the radio is already on with a map disc inserted, press the NAV hard key.

4. Press the MENU screen button.
5. Press the Stored Locations screen button.
6. Press the Home screen button.
7. Press the Delete screen button.
8. A confirmation pop-up screen appears: select Yes to delete; select No to cancel the operation.

To delete a waypoint or a stored preset destination:

1. Press the power/volume knob to turn the system on.
2. Insert the DVD map disc. See "Installing the Map DVD" under Maps for more information.
3. A notice may appear. Touch the Agree screen button to proceed.

If the radio is already on with a map disc inserted, press the NAV hard key.

4. Press the MENU screen button.
5. Press the Stored Locations screen button.
6. Press the Dest. & Way Pt. or the Previous Dest. screen button.
7. Press the Delete screen button, then select the way point or the numbered preset button to delete.
8. A confirmation pop-up screen appears: select Yes to delete; select No to cancel the operation.

To adjust the volume of voice guidance prompts:

1. Press the NAV hard key to access the map screen.
2. Press the MENU screen button on the map screen.
3. Press the Navigation Set Up screen button.
4. Press the Guidance Volume screen button.
5. Select the desired volume or select Off. The system plays back the new volume level.

See "Guidance Volume" under Navigation Set Up for more information.