Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Did you review the Remote Keyless Entry (RKE) System description and operation and perform the necessary inspections? | -- | Go to Step 2 | Go to Symptoms |
2 | Verify the fault is present. Does the system operate normally? | -- | Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems | Go to Step 3 |
3 | Have the RKE System Transmitters passed the Transmitter Test? | -- | Go to Step 4 | Go to Transmitter Test |
4 |
Is voltage present? | -- | Go to Step 8 | Go to Step 5 |
5 |
Is continuity present? | -- | Go to Step 7 | Go to Step 6 |
6 | Repair the open in CKT 294/694 (TAN) wire between the remote control door lock receiver connector cavity A and the LF door lock actuator motor. Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | -- | Go to Step 9 | -- |
7 | Replace the remote control door lock receiver. Refer to Receiver Replacement . Is the repair complete? | -- | Go to Step 9 | -- |
8 | Replace the LF door lock actuator motor. Refer to Front Side Door Lock Replacement . Is the repair complete? | -- | Go to Step 9 | -- |
9 | Operate the system in order to verify the repair. Did you correct the condition? | -- | System OK | Go to Step 2 |
