GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

  1. Open the hood
  2. Remove the wiper arms. Refer to Windshield Wiper Arm Replacement .
  3. Remove the air inlet grille panel. Refer to Air Inlet Grille Panel Replacement in Body Front End.
  4. Remove the wiper transmission. Refer to Windshield Wiper Transmission Replacement .

  5. Object Number: 1244689  Size: SH
  6. Remove the wiper motor fasteners.
  7. Pull upward on the wiper motor.
  8. Disconnect the wiper motor electrical connector.
  9. Remove the wiper motor from the vehicle.

Installation Procedure


    Object Number: 1244689  Size: SH
  1. Install the wiper motor into the vehicle.
  2. Connect the wiper motor electrical connector.
  3. Notice: Refer to Fastener Notice in the Preface section.

  4. Install the wiper motor fasteners.
  5. Tighten
    Tighten the wiper motor fasteners to 10 N·m (88 lb in).

  6. Install the wiper transmission. Refer to Windshield Wiper Transmission Replacement .
  7. Install the air inlet grille panel. Refer to Air Inlet Grille Panel Replacement in Body Front End.
  8. Install the wiper arms. Refer to Windshield Wiper Arm Replacement .
  9. Close the hood.