Tools Required

J 22102 Seal Installer

1. Disconnect the battery negative cable from the battery. Refer to Battery Cable in General Information.
2. Raise the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
3. Remove the drive belt form the vehicles drive pulleys. Refer to Drive Belt Replacement .
4. Remove the lower fan shroud from the radiator. Refer to Fan Shroud Replacement in Engine Cooling.



5. Remove the crankshaft balancer. Refer to Crankshaft Balancer Removal .

Important: Use care as not to damage the engine front cover or the crankshaft sealing area when removing the crankshaft front cover oil seal.

6. Remove the crankshaft front cover oil seal from the engine front cover.

Tools Required

J 22102 Seal Installer

1. Coat the crankshaft front cover oil seal with clean engine oil.



2. Use the J 22102 to install the crankshaft front cover oil seal.
3. Remove the J 22102 from the crankshaft front cover oil seal.



4. Install the crankshaft balancer to the crankshaft. Refer to Crankshaft Balancer Removal .
5. Install the drive belt on the vehicle drive pulleys. Refer to Drive Belt Replacement .



6. Install the lower fan shroud to the radiator. Refer to Fan Shroud Replacement in Engine Cooling.
7. Lower the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
8. Connect the battery negative cable to the battery. Refer to Battery Cable in Engine Electrical.