GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

  1. Remove the left closeout/insulator panel. Refer to Instrument Panel Insulator Panel Replacement - Left Side in Instrument Panel, Gages, and Console.
  2. Remove the knee bolster trim panel. Refer to Driver Knee Bolster Panel Replacement in Instrument Panel, Gages, and Console.
  3. Remove the instrument panel (I/P) cluster bezel, Chevrolet only. Refer to Instrument Panel Cluster Trim Plate Bezel Replacement in Instrument Panel, Gages, and Console.
  4. Remove the radio. Refer to Radio Replacement in Entertainment.

  5. Object Number: 957271  Size: SH
  6. Remove the 2 screws (1) from the bottom of the air outlet assembly.

  7. Object Number: 957157  Size: SH
  8. Remove the air deflectors from the outlet. Refer to Instrument Panel Air Outlet Replacement .
  9. Grasp and pull the outlet rearward from the I/P.

  10. Object Number: 957231  Size: SH
  11. Remove the outlet from the vehicle.

Installation Procedure


    Object Number: 957231  Size: SH
  1. If reinstalling the original outlet, install the air deflectors in the outlet. Refer to Instrument Panel Air Outlet Replacement .
  2. Install the outlet assembly to the I/P.
  3. Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 957271  Size: SH
  4. Install the 2 retaining screws (1).
  5. Tighten
    Tighten the screws to 2.5 N·m (22 lb in).

  6. Install the radio. Refer to Radio Replacement in Entertainment.
  7. Install the I/P cluster bezel, Chevrolet only. Refer to Instrument Panel Cluster Trim Plate Bezel Replacement in Instrument Panel, Gages, and Console.
  8. Install the knee bolster trim panel. Refer to Driver Knee Bolster Panel Replacement Instrument Panel, Gages, and Console.
  9. Install the left closeout/insulator panel. Refer to Instrument Panel Insulator Panel Replacement - Left Side Instrument Panel, Gages, and Console.