GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Oldsmobile 🢒 2003 🢒 Aurora 🢒 Body and Accessories 🢒 Doors 🢒 Front Side Door Upper Auxiliary Weatherstrip Replacement

Removal Procedure
  1. Remove the door trim panel. Refer to Front Side Door Trim Panel Replacement .
  2. Remove the door control module. Refer to Door Control Module Replacement .
  3. Remove the water deflector. Refer to Front Side Door Water Deflector Replacement .
  4. Remove the window inner belt sealing strip. Refer to Front Side Door Window Belt Inner Sealing Strip Replacement .
  5. Remove the outside rearview mirror. Refer to Power Mirror Replacement .
  6. Remove the window outer belt sealing strip. Refer to Front Side Door Window Belt Outer Sealing Strip Replacement .
  7. Remove the window. Refer to Front Side Door Window Replacement .
  8. Remove the window weatherstrip. Refer to Front Side Door Window Weatherstrip Replacement .

    9. Object Number: 428647 Size: SH
  9. Remove the upper auxiliary weatherstrip screws (1-7).
  10. Carefully pull the auxiliary weatherstrip away from the door header.

Installation Procedure

    Object Number: 428647 Size: SH
  1. Align the rear screw hole (1) in the weatherstrip to the plastic nut in the door header.
  2. Seat the top of the seal lip over the flange.
  3. Starting at the rear, roll the weatherstrip over the flange on the door header while holding the weatherstrip lip to prevent tucking under against the door.
  4. Install the rear screw (1).

    5. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  5. Install the remaining screws (2 --7).

    6. Tighten
    Tighten the screws in sequence to 2 N·m (18 lb in).

  6. Install the window weatherstrip. Refer to Front Side Door Window Weatherstrip Replacement .
  7. Install the window. Refer to Front Side Door Window Replacement .
  8. Install the window outer belt sealing strip. Refer to Front Side Door Window Belt Outer Sealing Strip Replacement .
  9. Install the outside rearview mirror. Refer to Power Mirror Replacement .
  10. Install the window inner belt sealing strip. Refer to Front Side Door Window Belt Inner Sealing Strip Replacement .
  11. Install the water deflector. Refer to Front Side Door Water Deflector Replacement .
  12. Install the door control module. Refer to Door Control Module Replacement .
  13. Install the door trim panel. Refer to Front Side Door Trim Panel Replacement .