Step | Action | Yes | No |
|---|---|---|---|
1 | Did you review the Steering Wheel and Column Description and Operation and perform the necessary inspections? | Go to Step 2 | |
2 | Verify that noise is present in the steering column during operation. Is noise present in the steering column during operation? | Go to Step 3 | System OK |
3 | Inspect the steering column and the coupling for looseness. Is the steering column or the coupling loose? | Go to Step 7 | Go to Step 4 |
4 | Inspect the SIR coil for noise. Is the SIR coil noisy? | Go to Step 8 | Go to Step 5 |
5 | Inspect the steering column and the steering shaft for damage. Is the steering column or the steering shaft damaged? | Go to Step 9 | Go to Step 6 |
6 | Inspect the steering shaft coupling for damage. Is the steering shaft coupling damaged? | Go to Step 9 | Go to Step 2 |
7 |
Notice: Refer to Fastener Notice in the Preface section. Tighten the steering column components to specifications. Refer to Fastener Tightening Specifications . Did you complete the repair? | Go to Step 10 | -- |
8 | Replace the SIR coil. Refer to Inflatable Restraint Steering Wheel Module Coil Replacement in SIR. Did you complete the repair? | Go to Step 10 | -- |
9 | Replace the steering column. Refer to Steering Column Replacement . Did you complete the repair? | Go to Step 10 | -- |
10 | Operate the system in order to verify the repair. Did you correct the condition? | System OK | Go to Step 3 |
