GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2006 🢒 GTO 🢒 Restraints 🢒 SIR 🢒 Front Floor Console Replacement

Removal Procedure
  1. Remove the console trim plate. Refer to Console Trim Plate Replacement .
  2. Remove the left console trim panel. Refer to Front Floor Console Side Trim Panel Replacement - Left Side .
  3. Remove the right console trim panel. Refer to Front Floor Console Side Trim Panel Replacement - Right Side .
  4. Remove the floor console compartment. Refer to Front Floor Console Compartment Replacement .

    5. Object Number: 1356712 Size: SH
  5. If equipped with an automatic transmission, remove the 4 screws (1), attaching the console (2) to the shifter assembly (3).

    6. Object Number: 1356713 Size: SH
  6. If equipped with a manual transmission, use a flat-bladed tool to disengage the retaining tabs (1) attaching the manual transmission shifter boot assembly (2) to the console.
  7. Remove the manual transmission gear shifter knob, if necessary. Refer to Transmission Control Lever Knob Replacement in Manual Transmissions - Tremac 6-Speed.
  8. Remove the manual transmission shifter boot assembly (2) from the shifter, if equipped.

    9. Object Number: 1356714 Size: SH
  9. Disconnect the console wiring connector (1) from the inner console.

    10. Object Number: 1356717 Size: SH
  10. Remove the two nuts (1) attaching the floor console (3) to the vehicle floor.
  11. Remove the two screws (2) attaching the front of the console to the instrument panel assembly.
  12. Remove the accessory power receptacle. Refer to Floor Console Accessory Power Receptacle Replacement in Power Outlets.
  13. Lift the rear of the console upward and remove from the vehicle.
  14. Remove the floor console armrest hinge, if necessary. Refer to Front Floor Console Armrest Hinge Replacement .
  15. Remove the center console end panel. Refer to Center Console End Panel Replacement .

    16. Object Number: 1356777 Size: SH
  16. Remove the screw (2) attaching the floor console rear air duct (3) to the floor console (1).
  17. Remove the floor console rear duct (3) from the floor console (1).
  18. Remove the console storage bin, if necessary. Refer to Front Floor Console Compartment Replacement .
  19. Remove the console lamp. Refer to Console Lamp Replacement in Lighting Systems.
  20. Remove the console compartment lamp switch. Refer to Console Compartment Lamp Switch Replacement in Lighting Systems.

Installation Procedure

    Object Number: 1356777 Size: SH
  1. Install the console compartment lamp switch. Refer to Console Compartment Lamp Switch Replacement in Lighting Systems.
  2. Install the console lamp. Refer to Console Lamp Replacement in Lighting Systems.
  3. Install the console storage bin, if removed. Refer to Front Floor Console Compartment Replacement .
  4. Install the floor console rear duct (3) to the floor console (1).

    5. Notice: Refer to Fastener Notice in the Preface section.

  5. Install the screw (2) attaching the floor console rear air duct (3) to the floor console (1).

    6. Tighten
    Tighten the screw (2) to 2 N·m (18 lb in).


    Object Number: 1356717 Size: SH
  6. Install the center console end panel. Refer to Center Console End Panel Replacement .
  7. Install the floor console armrest hinge, if removed. Refer to Front Floor Console Armrest Hinge Replacement .
  8. Install the floor console to the vehicle.
  9. Install the accessory power receptacle. Refer to Floor Console Accessory Power Receptacle Replacement in Power Outlets.
  10. Install the 2 screws (2) attaching the front of the console to the instrument panel assembly.

    11. Tighten
    Tighten the screws (2) to 2 N·m (18 lb in).

  11. Install the 2 nuts (1) attaching the floor console (3) to the vehicle floor

    12. Tighten
    Tighten the nuts (1) to 2 N·m (18 lb in).


    Object Number: 1356714 Size: SH
  12. Connect the console wiring connector (1) inside the inner console.

    13. Object Number: 1356713 Size: SH
  13. Install the manual transmission shifter boot assembly (2) to the shifter, if removed.
  14. Install the manual transmission gear shifter knob, if removed. Refer to Transmission Control Lever Knob Replacement in Manual Transmissions - Tremac 6-Speed.
  15. Install the manual transmission shifter boot assembly  (2) to the console making sure the retaining tabs (1) are engaged, if removed.

    16. Object Number: 1356712 Size: SH
  16. Install the 4 screws (1) attaching the console (2) to the automatic shifter assembly (3), if removed.

    17. Tighten
    Tighten the screws (1) to 2 N·m (18 lb in).

  17. Install the floor console compartment. Refer to Front Floor Console Compartment Replacement .
  18. Install the right console trim panel. Refer to Front Floor Console Side Trim Panel Replacement - Right Side .
  19. Install the left console trim panel. Refer to Front Floor Console Side Trim Panel Replacement - Left Side .
  20. Install the console trim plate. Refer to Console Trim Plate Replacement .