GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2009 🢒 Caprice WM 🢒 Seats 🢒 Seat Hardware, Trim, and Upholstery 🢒 Rear Seat Back Cushion Stop Striker Replacement

Removal Procedure
  1. Remove the rear seat cushion. Refer to Rear Seat Cushion Replacement.
  2. Remove the rear seat back bolster. Refer to Rear Split Folding Seat Back Bolster Replacement.
  3. Remove the luggage shade. Refer to Luggage Shade Replacement.
  4. Remove the rear end trim finish panel. Refer to Rear End Trim Finish Panel Replacement.
  5. Remove the rear compartment floor panel carpet. Refer to Rear Compartment Floor Panel Carpet Replacement.
  6. Remove the load floor stationary panel carpet. Refer to Load Floor Stationary Panel Carpet Replacement.
  7. Remove the load floor front panel carpet. Refer to Load Floor Front Panel Carpet Replacement.
  8. Remove the quarter inner finish trim panel. Refer to Quarter Inner Trim Finish Panel Replacement.

    9. Object Number: 2131761 Size: SH
  9. Remove the rear seat back cushion stop striker (1) from the body lock pillar inner panel bracket (2).

Installation Procedure

    Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 2131761 Size: SH
  1. Install the rear seat back cushion stop striker (1) to the body lock pillar inner panel bracket (2).

    2. Tighten
    Tighten the striker  to 70  N·m (52 lb ft).

  2. Install the quarter inner finish trim panel. Refer to Quarter Inner Trim Finish Panel Replacement.
  3. Install the load floor front panel carpet. Refer to Load Floor Front Panel Carpet Replacement.
  4. Install the load floor stationary panel carpet. Refer to Load Floor Stationary Panel Carpet Replacement.
  5. Install the rear compartment floor panel carpet. Refer to Rear Compartment Floor Panel Carpet Replacement.
  6. Install the rear end trim finish panel. Refer to Rear End Trim Finish Panel Replacement.
  7. Install the luggage shade. Refer to Luggage Shade Replacement.
  8. Install the seat back bolster. Refer to Rear Split Folding Seat Back Bolster Replacement.
  9. Install the rear seat cushion. Refer to Rear Seat Cushion Replacement.
  10. Check rear seat back latch operation.