GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

  1. Lower the rear window.
  2. Remove the power window switch, if equipped. Refer to Rear Side Door Window Switch Replacement .
  3. Remove the door handle bezel. Refer to Door Handle Bezel Replacement .
  4. Remove the trim panel. Refer to Front Side Door Trim Panel Replacement .
  5. Remove the water deflector. Refer to Rear Side Door Water Deflector Replacement .
  6. Remove the inner sealing strip. Refer to Front Side Door Window Belt Outer Sealing Strip Replacement or Rear Door Window Belt Inner Sealing Strip Replacement .
  7. Remove the outer sealing strip. Refer to Rear Door Window Belt Outer Sealing Strip Replacement .
  8. Remove the bolts with secure the regulator to the window.
  9. Separate the window from the regulator. Lower the window.

  10. Object Number: 332786  Size: SH
  11. Remove the lower bolt from the stationary window (2).
  12. Remove the stationary window (1) . Roll the window forward and remove the window with the run channel.

Installation Procedure


    Object Number: 332786  Size: SH
  1. Install the stationary window with the run channel weather-strip (1).
  2. Install the lower bolt to the stationary window (2).
  3. Attach the window to the regulator.
  4. Install the bolts which secure the rear window to the regulator.
  5. Install the outer sealing strip. Refer to Rear Door Window Belt Outer Sealing Strip Replacement .
  6. Install the inner sealing strip. Refer to Rear Door Window Belt Inner Sealing Strip Replacement .
  7. Install the water deflector. Refer to Rear Side Door Water Deflector Replacement .
  8. Install the trim panel.
  9. Install the screws which secure the trim panel. Refer to Front Side Door Trim Panel Replacement .
  10. Install the door handle bezel. Refer to Door Handle Bezel Replacement .
  11. Install the power window switch, if equipped. Refer to Rear Side Door Window Switch Replacement .
  12. Test the window operation.