Rear Window Shelf Trim Panel Replacement Late Production

Caution: Refer to SIR Caution in the Preface section.

1. If equipped, disable the roof rail airbag module. Refer to SIR Disabling and Enabling and to SIR Disabling and Enabling in SIR.
2. Remove the rear seat cushion. Refer to Rear Seat Cushion Replacement in Seats.
3. Remove the rear seat back. Refer to Rear Split Folding Seat Back Replacement in Seats.
4. Remove the upper lock pillar trim. Refer to Lock Pillar Upper Garnish Molding Replacement .
5. Remove the lower lock pillar trim. Refer to Body Lock Pillar Garnish Lower Molding Replacement .



6. Remove the rear seat belt anchor bolts.



7. Remove the trim panel push-in fasteners.



8. Reach underneath the trim panel depress the bezel tabs and push the webbing bezels up and out of the trim panel.
9. Feed the seat belt webbing, the webbing bezels, and the anchor bolts back through the holes in the shelf trim.
10. Remove the rear window shelf trim from the vehicle.

1. Install the rear window shelf trim.
2. Feed the seat belt webbing, the anchor bolts, and the bezels through the slots in the shelf trim.
3. Install the webbing bezels in the shelf trim.



4. Install the push-in fasteners.

Notice: Refer to Fastener Notice in the Preface section.




5. Install the rear seat belt anchor bolts.

Tighten
Tighten the bolts to 45 N·m (33 lb ft).

6. Install the lower lock pillar trim. Refer to Body Lock Pillar Garnish Lower Molding Replacement .
7. Install the upper lock pillar trim. Refer to Lock Pillar Upper Garnish Molding Replacement .
8. Install the rear seat back. Refer to Rear Split Folding Seat Back Replacement in Seats.
9. Install the rear seat cushion. Refer to Rear Seat Cushion Replacement in Seats.
10. If equipped, enable the roof rail airbag module. Refer to SIR Disabling and Enabling and to SIR Disabling and Enabling in SIR.