Important: The following steps must be completed before using the symptom tables.
- Perform the
Diagnostic System Check - Instrument Cluster
or
Diagnostic System Check - Driver Information Systems
before using the symptom table in order to verify that all of the following are true:
• | The module(s) can communicate via the serial data link. |
- Review the system operation in order to familiarize yourself with the system functions. Refer to the following:
Visual/Physical Inspection
• | Inspect for aftermarket devices which could affect the operation of the instrument cluster, driver information display, or audible warnings. Refer to
Checking Aftermarket Accessories
in Wiring Systems. |
• | Inspect the easily accessible or visible system components for obvious damage or conditions which could cause the symptom. |
• | For any indicator or message relating to fluid level, perform a visual inspection of the fluid level before beginning diagnosis. |
• | Verify that the indicators, message display works properly during the bulb check. |
Intermittent
Faulty electrical connections or wiring may be the cause of intermittent conditions. Refer to
Testing for Intermittent Conditions and Poor Connections
in Wiring Systems.
Symptom List
Refer to a symptom diagnostic procedure from the following list in order to diagnose the symptom:
Audible Warnings
For symptom diagnosis refer to one of the following:
Gauges
For symptom diagnosis refer to one of the following:
Indicators
For symptom diagnosis refer to one of the following:
Messages
For symptom diagnosis refer to one of the following:
Driver Information Display (DID)
For symptom diagnosis refer to one of the following: