Important: The following steps must be completed before using the symptom tables.
- Perform the
Diagnostic System Check - Instrument Cluster
for DIC, HUD and IPC systems or
the
Diagnostic System Check - Audible Warnings
for audible warnings before using the symptom table
in order to verify that all of the following are true:
| • | The module(s) can communicate via the serial data link. |
- Review the system operation in order to familiarize yourself with the
system functions. Refer to the following:
Visual/Physical Inspection
| • | Inspect for aftermarket devices which could affect the operation of the
audible warnings, DIC, HUD or IPC. Refer to
Checking Aftermarket Accessories
in Wiring
Systems. |
| • | Inspect the easily accessible or visible system components for obvious
damage or conditions which could cause the symptom. |
| • | For any indicator or message relating to fluid level, perform a visual
inspection of the fluid level before beginning diagnosis. |
| • | Verify that the indicators, and message display works properly during
the bulb check. |
Intermittent
Faulty electrical connections or wiring may be the cause of intermittent conditions.
Refer to
Testing for Intermittent Conditions and Poor Connections
in Wiring Systems.
Symptom List
Refer to a symptom diagnostic procedure from the following list in order to
diagnose the symptom:
Audible Warnings
For symptom diagnosis refer to one of the following:
Driver Information Display (DID)
For symptom diagnosis refer to one of the following:
Gages
For symptom diagnosis refer to one of the following:
Heads Up Display
For symptom diagnosis refer to one of the following:
Indicators
For symptom diagnosis refer to one of the following:
