Important: The following steps must be completed before using the symptom tables.
- Perform the
Diagnostic System Check - Body Rear End
before using the Symptom Tables in order
to verify that all of the following are true:
| • | The control module(s) can communicate via the serial data link. |
- Review the system operation in order to familiarize yourself with
the system functions. Refer to:
Visual/Physical Inspection
| • | Inspect for aftermarket devices which could affect the operation
of the Release Systems, or Body Control Module operation. Refer to
Checking Aftermarket Accessories
in Wiring Systems. |
| • | Inspect the easily accessible or visible system components for
obvious damage or conditions which could cause the symptom. |
| • | Inspect latches for any binding conditions, and door or lid alignments
for proper fit. |
Intermittent
Faulty electrical connections or wiring may be the cause of intermittent
conditions. Refer to
Testing for Intermittent Conditions and Poor Connections
in Wiring Systems.
Symptom List
Refer to a symptom diagnostic procedure from the following list in order
to diagnose the symptom:
