DTC
| Description
| Indication
| Default Action
|
DTC P0218
| Transmission Over Temperature Condition
| No Change
|
| • | TCM assumes the transaxle fluid temperature is 60°C. |
| • | No influence on drivability |
|
DTC P0562
| System Voltage Low
| Hold Lamp Flashing - Non-European Emissions
MIL ON - European Emissions
|
| • | The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer. |
| • | Adopt Emergency/Substitute mode and constant 4th gear by hydraulic control. |
| • | After ignition OFF/ON: 3rd gear by hydraulic control. Possible P, R and N also possible. |
| • | Power supply cut off to the PCS valve. |
|
DTC P0563
| System Voltage High
| Hold Lamp Flashing - Non-European Emissions
MIL ON - European Emissions
|
| • | The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer. |
| • | Adopt Emergency/Substitute mode and constant 4th gear by hydraulic control. |
| • | After ignition OFF/ON: 3rd gear by hydraulic control. Possible P, R and N also possible. |
| • | Power supply cut off to the PCS valve. |
|
DTC P0601
| Internal Control Module Memory Checksum Error
| Hold Lamp Flashing - Non-European Emissions
MIL ON - European Emissions
|
| • | The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer. |
| • | Adopt Emergency/Substitute mode and constant 4th gear by hydraulic control. |
| • | After ignition OFF/ON : 3rd gear by hydraulic control. Possible P, R and N also possible. |
| • | Power supply cut off to the PCS valve. |
|
DTC P0603
| Internal Control Module Keep Alive Memory (KAM) Error
| Hold Lamp Flashing - Non-European Emissions
MIL ON - European Emissions
|
| • | The TCM will record operating conditions at he time the diagnostic fails. This information will be stored in the Failure Records buffer. |
| • | Adopt Emergency/Substitute mode and constant 4th gear by hydraulic control. |
| • | After ignition OFF/ON: 3rd gear by hydraulic control. Possible P, R and N also possible. |
| • | Power supply cut off to the PCS valve. |
|
DTC P0604
| TCM Random Access Memory (RAM) Error
| Hold Lamp Flashing - Non-European Emissions
MIL ON - European Emissions
|
| • | The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer. |
| • | Adopt Emergency/ Substitute mode and constant 4th gear by hydraulic control. |
| • | After ignition OFF/ON : 3rd gear by hydraulic control. Possible P, R and N also possible. |
| • | Power supply cut off to the PCS valve. |
|
DTC P0606
| Transaxle Control Module Processor Fault - Failure of External Watchdog
| Hold Lamp Flashing - Non-European Emissions
MIL ON - European Emissions
|
| • | The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer. |
| • | Adopt Emergency/Substitute mode and constant 4th gear by hydraulic control. |
| • | After ignition OFF/ON: 3rd gear by hydraulic control. Possible P, R and N also possible. |
| • | Power supply cut off to the PCS valve. |
|
DTC P0703
| Brake Switch Circuit Malfunction
| No Change
|
| • | TCM assume that the brake light always active. |
|
DTC P0705
| Transmission Range Sensor Output Shorted to Ground or Open
| No Change - Non-European Emissions
| The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer.
|
DTC P0705
| Transmission Range Sensor Circuit Malfunction (PRNDL Input)
| MIL ON - European Emissions
|
| • | The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer. |
| • | Adopt Emergency/Substitute mode and constant 4th gear by hydraulic control. |
| • | After ignition OFF/ON: 3rd gear by hydraulic control. Possible P, R and N also possible. |
|
DTC P0706
| Transmission Range Sensor Circuit Malfunction - PRNDL Input
| Hold Lamp Flashing - Non-European Emissions
MIL ON - European Emissions
|
| • | The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer. |
| • | Adopt Emergency/Substitute mode and constant. |
| • | After ignition OFF/ON: 3rd gear by hydraulic control, position P, R and N also possible. |
|
DTC P0710
| Transmission Fluid Temperature Sensor Circuit Malfunction
| No Change
|
| • | The TCM assumes that the transaxle fluid temperature is 80°C (140°F) |
| • | No influence at vehicle running |
|
DTC P0715
| Input Speed Sensor Circuit Malfunction
| MIL ON
|
| • | The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer. |
| • | Adopt Emergency/Substitute mode and constant 4th gear by hydraulic control. |
| • | After ignition OFF/ON: 3rd gear by hydraulic control. Possible P, R and N also possible. |
|
DTC P0716
| Input Speed Sensor Circuit Fault
| Hold Lamp Flashing - Non-European Emissions
MIL ON - European Emissions
|
| • | The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer. |
| • | Adopt Emergency/ Substitute mode and constant 4th gear by hydraulic control. |
| • | After ignition OFF/ON : 3rd gear by hydraulic control, position P, R and N also possible. |
|
DTC P0717
| Input Speed Sensor Circuit Range / Performance
| MIL ON
|
| • | The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer. |
| • | Adopt Emergency/Substitute mode and constant 4th gear by hydraulic control. |
| • | After ignition OFF/ON: 3rd gear by hydraulic control. Possible P, R and N also possible. |
|
DTC P0720
| Output Speed Sensor Circuit Malfunction
| MIL ON
|
| • | The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer. |
| • | Adopt Emergency/Substitute mode and constant 4th gear by hydraulic control. |
|
DTC P0721
| Output Speed Sensor Circuit Fault
| Hold Lamp Flashing - Non-European Emissions
MIL ON - European Emissions
|
| • | The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer. |
| • | Adopt Emergency/ Substitute mode and constant 4th gear. |
|
DTC P0722
| Output Speed Sensor Circuit No Signal
| MIL ON
|
| • | The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer. |
| • | Vehicle running remains actual gear |
|
DTC P0725
| Engine Speed Input Circuit Malfunction
| No Change
|
| • | Adopt Emergency/ Substitute mode and constant 4th gear. |
|
DTC P0726
| Engine Speed Input Circuit Fault
| Hold Lamp Flashing - Non-European Emissions
MIL ON - European Emissions
|
| • | The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer. |
| • | Adopt Emergency/ Substitute mode and constant 4th gear. |
|
DTC P0727
| Engine Speed Input Circuit No Signal
| MIL ON
|
| • | The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer. |
| • | Adopt Emergency/ Substitute mode and constant 4th gear. |
|
DTC P0731
| Gear 1 Incorrect Ratio
| Hold Lamp Flashing - Non-European Emissions
MIL ON - European Emissions
|
| • | The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer. |
| • | Adopt Emergency/ Substitute mode and constant 4th gear. |
|
DTC P0732
| Gear 2 Incorrect Ratio
| Hold Lamp Flashing - Non-European Emissions
MIL ON - European Emissions
|
| • | The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer. |
| • | Adopt Emergency/ Substitute mode and constant 3rd gear. |
|
DTC P0733
| Gear 3 Incorrect Ratio
| Hold Lamp Flashing - Non-European Emissions
MIL ON - European Emissions
|
| • | The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer. |
| • | Adopt Emergency/ Substitute mode and constant 4th gear. |
|
DTC P0734
| Gear 4 Incorrect Ratio
| Hold Lamp Flashing - Non-European Emissions
MIL ON - European Emissions
|
| • | The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer. |
| • | Adopt Emergency/ Substitute mode and constant 4th gear by hydraulic control. |
| • | After ignition OFF/ON : 3rd gear by hydraulic control. Possible P, R and N also possible. |
|
DTC P0781
| 1-2 Shift Malfunction
| Hold Lamp Flashing - Non-European Emissions
MIL ON - European Emissions
|
| • | The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer. |
| • | Adopt Emergency/ Substitute mode and constant 1st gear. |
|
DTC P0782
| 2-3 Shift Malfunction
| Hold Lamp Flashing - Non-European Emissions
MIL ON - European Emissions
|
| • | The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer. |
| • | Adopt Emergency/ Substitute mode and constant 2nd gear. |
|
DTC P0783
| 3-4 Shift Malfunction
| Hold Lamp Flashing - Non-European Emissions
MIL ON - European Emissions
| The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer. Adopt Emergency/ Substitute mode and constant 3rd gear. Open lock up clutch.
|
DTC P1604
| Data Check of Internal and Extended Ram Failed
| MIL ON
|
| • | The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer. |
| • | Adopt Emergency/Substitute mode and constant 4th gear by hydraulic control. |
| • | After ignition OFF/ON: 3rd gear by hydraulic control. Possible P, R and N also possible. |
| • | Power supply cut OFF to the PCS valve. |
|
DTC P1606
| Transaxle Control Module Processor Fault - Reset Counter Error
| Hold Lamp Flashing - Non-European Emissions
|
| • | The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer. |
| • | Adopt Emergency/Substitute mode and constant 4th gear by hydraulic control. |
| • | After ignition OFF/ON: 3rd gear by hydraulic control. Possible P, R and N also possible. |
| • | Power supply cut OFF to the PCS valve. |
|
DTC P1606
| Failure of External Watchdog
| MIL ON - European Emissions
|
| • | The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer. |
| • | Adopt Emergency/Substitute mode and constant 4th gear by hydraulic control. |
| • | After ignition OFF/ON: 3rd gear by hydraulic control. Possible P, R and N also possible. |
| • | Power supply cut OFF to the PCS valve. |
|
DTC P1671
| CAN Transmit Message Failure
| MIL ON
|
| • | The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer. |
| • | Adopt Emergency/Substitute mode and constant 4th gear by hydraulic control. |
| • | After ignition OFF/ON: 3rd gear by hydraulic control. Possible P, R and N also possible. |
|
DTC P1672
| CAN Bus OFF Failure
| MIL ON
|
| • | The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer. |
| • | Adopt Emergency/Substitute mode and constant 4th gear by hydraulic control. |
| • | After ignition OFF/ON: 3rd gear by hydraulic control. Possible P, R and N also possible. |
|
DTC P1673
| Can Receive ECM Message Failure
| MIL ON
|
| • | The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer. |
| • | Adopt Emergency/Substitute mode and constant 4th gear by hydraulic control. |
| • | After ignition OFF/ON: 3rd gear by hydraulic control. Possible P, R and N also possible. |
|
DTC P1779
| Engine Torque Input Signal Malfunction
| No Change
| Adjustable value, calculated over the substitute map throttle position using engine speed, engine torque.
|
DTC P1780
| Engine Torque Reduction Fault
| No Change
| Adjustable value, calculated over the substitute map throttle position using engine speed, engine torque.
|
DTC P1791
| Throttle Position Input Signal Circuit Malfunction
| No Change
| Adjustable value, calculated over the substitute map throttle position using engine speed, engine torque.
|
DTC P1839
| PCS3 Output Shorted To Ground
| Hold Lamp Flashing - Non-European Emissions
MIL ON - European Emissions
|
| • | The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer. |
| • | Adopt Emergency/Substitute mode and constant 4th gear by hydraulic control. |
| • | After ignition OFF/ON: 3rd gear by hydraulic control. Possible P, R and N also possible. |
| • | Power supply cut OFF to the PCS valve. |
|
DTC P1840
| PCS3 Output Shorted To Power
| Hold Lamp Flashing - Non-European Emissions
MIL ON - European Emissions
|
| • | The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer. |
| • | Adopt Emergency/Substitute mode and constant 4th gear by hydraulic control. |
| • | After ignition OFF/ON: 3rd gear by hydraulic control. Possible P, R and N also possible. |
| • | Power supply cut OFF to the PCS valve. |
|
DTC P1841
| PCS3 Output Open
| Hold Lamp Flashing - Non-European Emissions
MIL ON - European Emissions
|
| • | The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer. |
| • | Adopt Emergency/Substitute mode and constant 4th gear by hydraulic control. |
| • | After ignition OFF/ON: 3rd gear by hydraulic control. Possible P, R and N also possible. |
| • | Power supply cut OFF to the PCS valve. |
|
DTC P1850
| Solenoid 1 Output Shorted To Ground
| Hold Lamp Flashing - Non-European Emissions
MIL ON - European Emissions
|
| • | The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer. |
| • | Adopt Emergency/ Substitute mode and constant 4th gear by hydraulic control. |
| • | After ignition OFF/ON : 3rd gear by hydraulic control. Possible P, R and N also possible. |
|
DTC P1851
| Solenoid 1 Output Shorted To Power
| Hold Lamp Flashing - Non-European Emissions
MIL ON - European Emissions
|
| • | The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer. |
|
DTC P1852
| Solenoid 1 Output Open
| Hold Lamp Flashing - Non-European Emissions
MIL ON - European Emissions
|
| • | The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer. |
| • | Adopt Emergency/ Substitute mode and constant 4th gear by hydraulic control. |
| • | After ignition OFF/ON : 3rd gear by hydraulic control. Possible P, R and N also possible. |
|
DTC P1853
| Solenoid 2 Output Shorted To Ground
| Hold Lamp Flashing - Non-European Emissions
MIL ON - European Emissions
|
| • | The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer. |
| • | Adopt Emergency/ Substitute mode and constant 4th gear by hydraulic control. |
| • | After ignition OFF/ON : 3rd gear by hydraulic control. Possible P, R and N also possible. |
|
DTC P1854
| Solenoid 2 Output Shorted To Power
| Hold Lamp Flashing - Non-European Emissions
MIL ON - European Emissions
|
| • | The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer. |
| • | Adopt Emergency/ Substitute mode and constant 4th gear by hydraulic control. |
| • | After ignition OFF/ON : 3rd gear by hydraulic control. Possible P, R and N also possible. |
|
DTC P1855
| Solenoid 2 Output Open
| Hold Lamp Flashing - Non-European Emissions
MIL ON - European Emissions
|
| • | The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer. |
| • | Adopt Emergency/ Substitute mode and constant 4th gear by hydraulic control. |
| • | After ignition OFF/ON : 3rd gear by hydraulic control. Possible P, R and N also possible. |
|
DTC P1861
| PCS4 Output Shorted To Ground
| Hold Lamp Flashing - Non-European Emissions
MIL ON - European Emissions
|
| • | The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer. |
| • | Adopt Emergency/Substitute mode and constant 4th gear by hydraulic control. |
| • | After ignition OFF/ON: 3rd gear by hydraulic control. Possible P, R and N also possible. |
| • | Power supply cut OFF to the PCS valve. |
|
DTC P1862
| PCS4 Output Shorted To Power
| Hold Lamp Flashing - Non-European Emissions
MIL ON - European Emissions
|
| • | The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer. |
| • | Adopt Emergency/Substitute mode and constant 4th gear by hydraulic control. |
| • | After ignition OFF/ON: 3rd gear by hydraulic control. Possible P, R and N also possible. |
| • | Power supply cut OFF to the PCS valve. |
|
DTC P1863
| PCS4 Output Open
| Hold Lamp Flashing - Non-European Emissions
MIL ON - European Emissions
|
| • | The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer. |
| • | Adopt Emergency/Substitute mode and constant 4th gear by hydraulic control. |
| • | After ignition OFF/ON: 3rd gear by hydraulic control. Possible P, R and N also possible. |
| • | Power supply cut OFF to the PCS valve. |
|
DTC P1864
| PCS5 Output Shorted To Ground
| Hold Lamp Flashing - Non-European Emissions
MIL ON - European Emissions
|
| • | The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer. |
| • | Adopt Emergency/Substitute mode and constant 4th gear by hydraulic control. |
| • | After ignition OFF/ON: 3rd gear by hydraulic control. Possible P, R and N also possible. |
| • | Power supply cut OFF to the PCS valve. |
|
DTC P1865
| PCS5 Output Shorted To Power
| Hold Lamp Flashing - Non-European Emissions
MIL ON - European Emissions
|
| • | The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer. |
| • | Adopt Emergency/Substitute mode and constant 4th gear by hydraulic control. |
| • | After ignition OFF/ON: 3rd gear by hydraulic control. Possible P, R and N also possible. |
| • | Power supply cut OFF to the PCS valve. |
|
Differential/Side Shaft Outer Race, Bearing Shim Removal
| PCS5 Output Open
| Hold Lamp Flashing - Non-European Emissions
MIL ON - European Emissions
|
| • | The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer. |
| • | Adopt Emergency/Substitute mode and constant 4th gear by hydraulic control. |
| • | After ignition OFF/ON: 3rd gear by hydraulic control. Possible P, R and N also possible. |
| • | Power supply cut OFF to the PCS valve. |
|
Differential/Side Shaft Outer Race, Bearing Shim Installation
| PCS6 Output Shorted To Ground
| Hold Lamp Flashing - Non-European Emissions
MIL ON - European Emissions
|
| • | The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer. |
| • | Adopt Emergency/Substitute mode and constant 4th gear by hydraulic control. |
| • | After ignition OFF/ON: 3rd gear by hydraulic control. Possible P, R and N also possible. |
| • | Power supply cut OFF to the PCS valve. |
|
DTC P1853
| PCS6 Output Shorted To Power
| Hold Lamp Flashing - Non-European Emissions
MIL ON - European Emissions
|
| • | The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer. |
| • | Adopt Emergency/Substitute mode and constant 4th gear by hydraulic control. |
| • | After ignition OFF/ON: 3rd gear by hydraulic control. Possible P, R and N also possible. |
| • | Power supply cut OFF to the PCS valve. |
|
DTC P1869
| PCS6 Output Open
| Hold Lamp Flashing - Non-European Emissions
MIL ON - European Emissions
|
| • | The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer. |
| • | Adopt Emergency/Substitute mode and constant 4th gear by hydraulic control. |
| • | After ignition OFF/ON: 3rd gear by hydraulic control. Possible P, R and N also possible. |
| • | Power supply cut OFF to the PCS valve. |
|
DTC P1871
| PCS Valve Power Supply Circuit Shorted To Power
| Hold Lamp Flashing - Non-European Emissions
MIL ON - European Emissions
|
| • | The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer. |
| • | Adopt Emergency/Substitute mode and constant 4th gear by hydraulic control. |
| • | After ignition OFF/ON: 3rd gear by hydraulic control. Possible P, R and N also possible. |
| • | Power supply cut OFF to the PCS valve. |
|
DTC P1874
| Solenoid Valve Power Supply Circuit Shorted To Power
| Hold Lamp Flashing - Non-European Emissions
MIL ON - European Emissions
|
| • | The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer. |
| • | Adopt Emergency/ Substitute mode and constant 4th gear by hydraulic control. |
| • | After ignition OFF/ON : 3rd gear by hydraulic control. Possible P, R and N also possible. |
|
DTC P1881
| 2-1 Shift Malfunction
| Hold Lamp Flashing - Non-European Emissions
MIL ON - European Emissions
|
| • | The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer. |
| • | Adopt Emergency/ Substitute mode and constant 3rd gear. |
|
DTC P1883
| 3-2 Shift Malfunction
| Hold Lamp Flashing - Non-European Emissions
MIL ON - European Emissions
|
| • | The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer. |
| • | Adopt Emergency/ Substitute mode and constant 3rd gear. |
|
DTC P1884
| 4-3 Shift Malfunction
| Hold Lamp Flashing - Non-European Emissions
MIL ON - European Emissions
|
| • | The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer. |
| • | Adopt Emergency/ Substitute mode and constant 4th gear. |
|
DTC P1885
| 3-1 Shift Malfunction
| Hold Lamp Flashing - Non-European Emissions
MIL ON - European Emissions
|
| • | The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer. |
| • | Adopt Emergency/ Substitute mode and constant 3rd gear. |
|
DTC P1886
| 4-2 Shift Malfunction
| Hold Lamp Flashing - Non-European Emissions
MIL ON - European Emissions
|
| • | The TCM will record operating conditions at the time the diagnostic fails. This information will be stored in the Failure Records buffer. |
| • | Adopt Emergency/ Substitute mode and constant 4th gear. |
|
